Amabili | Angeles | Baliga | Barthelat | Bergthorson | Cortelezzi | Forbes | Fried | Frost | Habashi | Haller | Higgins | Hubert | Kokkolaris | Kovecses | Lee J.H.S. | Lee T. | Legrand | Lessard | Liu | Mateescu | Misra | Mongeau | Mongrain | Mydlarski | Nadarajah | Nahon | Paidoussis | Pasini | Sharf | Timofeev | Vengallatore | Zhao |
AMABILI, M.
Journal Publications
Amabili, M., and Carra, S., 2012, “Experiments and simulations for large-amplitude vibrations of rectangular plates carrying concentrated masses”, Journal of Sound and Vibration, Vol. 331, pp. 155-166.
Alijani, F., Amabili, M., 2012, “Chaotic vibrations in functionally graded doubly curved shells with internal resonance”, DOI:10.1142/s0219455412500472, International Journal of Structural Stability and Dynamics.
Amabili M., Karazis, K., Mongrain, R., Païdoussis, M.P., Cartier, R., 2012,“A three-layer model for buckling of a human aortic segment under specific flow-pressure conditions”, International Journal for Numerical Methods in Biomedical Engineering, Vol. 28, pp. 495-512.
Pilgun, G., Amabili, M., 2012, “Nonlinear vibrations of shallow circular cylindrical panels with complex geometry. Meshless discretization with the R-functions method”, International Journal of Non-linear Mechanics, Vol. 47, pp. 137-152.
Amabili, M., Tajahmadi, S., 2012, “Thermal post-buckling of laminated and isotropic rectangular plates with fixed edges: comparison of experimental and numerical results”, M. R. Journal of Mechanical Engineering Science, Vol. 226, pp. 2393-2401.
Amabili, M., 2012, “Internal resonances in non-linear vibrations of a laminated circular cylindrical shell”, Nonlinear Dynamics, Vol. 69, pp. 755-770.
Daneshmand, F., Amabili, M., 2012, “Coupled oscillations of a protein microtubule immersed in cytoplasm: an orthotropic elastic shell modeling”, Journal of Biological Physics, Vol. 38, pp. 429-448.
Ghayesh, M. H., Kazemirad, S., Amabili, M., 2012, “Coupled longitudinal-transverse dynamics of an axially moving beam with an internal resonance”, Mechanism and Machine Theory, Vol. 52, pp. 18-34.
Kazemirad, S., Ghayesh, M. H, Amabili, M., 2012, “Thermo-mechanical nonlinear dynamics of a buckled axially moving beam”, DOI:10.1007/s00419-012-0630-8, Archive of Applied Mechanics.
Ghayesh, M. H, Amabili, M, 2012, “Three-dimensional nonlinear planar dynamics of an axially moving Timoshenko beam”, DOI 10.1007/s00419-012-0706-5, Archive of Applied Mechanics.
Ghayesh, M. H, Amabili, M., Païdoussis, M. P., 2012, “Nonlinear vibrations and stability of an axially moving beam with an intermediate spring support: two-dimensional analysis”, Nonlinear Dynamics, Vol. 70, pp. 335-354.
Amabili, M., 2012, “Nonlinear vibrations of angle-ply laminated circular cylindrical shells: Skewed modes”, Composite Structures, Vol. 94, pp. 3697-3709.
Ghayesh, M. H, Amabili, M., Païdoussis, M.P., 2012, “Thermo-mechanical phase-shift determination in Coriolis mass-flowmeters with added masses”, Journal of Fluids and Structures, Vol. 34, pp. 1-13.
Amabili, M., Ghayesh, M. H, Païdoussis, M.P., 2012, “Subcritical parametric response of an axially accelerating beam”, Thin-Walled Structures, Vol. 60, pp. 185-193.
Amabili, M., Ghayesh, M. H, 2012, “Nonlinear dynamics of axially moving viscoelastic beams over the buckled state”, Computers and Structures, Vol. 112-113, pp. 406-421.
Conference Proceedings
D’Alessandro, V., Amabili, M., S. De Rosa, F. Franco, Proceedings of the Noise and Vibration: Emerging Methods (NOVEM) Conference, Preliminary identifications of sandwich panels, Sorrento, Italy, April 1-4, 2012.
Breslavsky, I., Amabili, M., M. Legrand, Proceedings of the European Solid Mechanics Conference (Euromech), Physically and geometrically nonlinear vibrations of thin rectangular plates, Graz. Austria July 9 -13, 2012.
Amabili, M., Proceedings of the European Solid Mechanics Conference (Euromech), Comparison of different shell theories for nonlinear vibrations of laminated circular cylindrical shells, July 9-13, 2012 Graz. Austria.
Koh, B., Rustighi, E., Mace, B., Amabili, M., Proceedings of the 25th International Seminar on Modal Analysis (ISMA 25), Numerical and experimental assessment of hybrid active-passive damping treatments, Leuven, Belgium, September 17-19, 2012.
Amabili, M., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2012-85615), A new higher-order shear deformation theory with thickness variation for nonlinear vibrations of laminated doubly curved shells, , Houston, USA November 9-15, 2012.
Alijani, F., Amabili, M., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2012-89140), Nonlinear parametric instability of functionally graded rectangular plates in thermal environments, Houston, USA, November 9-15, 2012.
Amabili, M., Karazis, K., Mongrain, R., Shahmansouri, N., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2012-89141), A model for the nonlinear buckling of human aorta, Houston, USA, November 9-15, 2012.
Alijani, F., Amabili, M., Proceedings of the ASME International Mechanical Engineering Congress and Exposition, (IMECE2012-89724), Large amplitude vibrations of completely free rectangular plates, Houston, USA, November 9-15, 2012.
Kheiri, M., Paidoussis, M.P., Amabili, M., Epureanu, B.I., Proceedings of the 10th International Conference on Flow Induced Vibration (FIV 2012), Three-dimensional dynamics of long pipes towed underwater, Dublin, Ireland, 2012.
Paidoussis, M.P., Amabili, M., Ghayesh, M. H., Proceedings of the 10th International Conference on Flow Induced Vibration (FIV 2012), Dynamics of fluid-conveying cantilevered pipes with additional adornments, Dublin, Ireland, 3-6 June, 2012.
ANGELES, J.
Journal Publications
Shen, J.J., Kalantari, M., Kovëcses, J., Angeles, J. and Dargahi, J., 2012, “Viscoelastic modeling of the contact interaction between a tactile sensor and an atrial tissue, ” IEEE Transactions on Biomedical Engineering, Vol. 59, No. 6, pp. 1727-1738.
Taghvaeipour, A, Angeles, J. and Lessard, L., 2012, “Constraint-wrench analysis of robotic manipulators”, Multibody system Dynamics, DOI 10.1007/s11044-012-9318-7, 30 pp.
Javid, F., Angeles, J., Pasini, D. and Cecere, R., 2012, “Shape optimization of a self-deployable anchor designed for percutaneous mitral valve repair”, ASME J. Medical Devices, Vol. 6, No. 1, pp. 011003-1-011003-7.
Zargarbashi, S.S.H., Khan, W.A. and Angeles, J., 2012, “Posture optimization in robot-assisted machining operations”, Mechanism and Machine Theory, Vol. 51, pp. 74-86.
Alizadeh, D., Ma, X.Q. and Angeles, J., 2012, “On the reduction of the normality conditions in equality-constrained optimization problems in mechanics”, Meccanica, Vol. 47, pp. 755-768.
Conference Proceedings
Figliolini, G., Rea, P. and Angeles, J., "The synthesis of the axodes of spatial four-bar linkages,'' Proc. ASME 2012 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, Paper No. DETC2012-71255. This paper received the A.T. Yang Memorial Award in Theoretical Kinematics at the conference, Chicago, IL, August 12-15, 2012.
Al-Widyan, K.M. and Angeles, J., "The kinematic synthesis of a robust RCCC mechanism for pick-and-place operations,'' Proc. ASME 2012 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, Paper No.~DETC2012-70878, Chicago, IL, August 12-15, 2012.
Azimi, A., Kövecses, J. and Angeles, J., "Wheel-soil interaction model for rover simulation based on plasticity theory,'' Proc. 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems IROS 2011, San Francisco, CA, September 25-30, 2011, pp. 280-285.
Angeles, J., "The dual generalized inverses and their applications in kinematic synthesis," in Lenarčič, J. and Husty, M. (editors), Latest Advances in Robot Kinematics, Springer, Dordrecht, 2012, pp. 1—10.
BALIGA, B.R.
Conference Proceedings
Kattoura, S., Lamoureux, A., and Baliga, B.R., “A Control-Volume Finite Element Method for the Prediction of Three-Dimensional Diffusion-Type Phenomena in Anisotropic Media,” Proceedings of HEFAT2012, 9th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, pp. 730-737, Malta, July 16-18, 2012. This publication received the Best Paper Award in the session on "Computational Fluid Dynamics 2" at HEFAT2012.
Lagana, A. and Baliga, B.R., “Visualization of Mixed Convection in Vertical, Horizontal, and Inclined Pipes,” Proceedings of HEFAT2012, 9th International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, pp. 1397-1404, Malta, July 16-18, 2012.
Bories, S., Elkouh, N., and Baliga, B.R., “Fixed-Grid Simulations of Steady, Two-Dimensional, Ice-Water Systems with Laminar Natural Convection in the Liquid,” Proceedings of CHT-12, ICHMT International Symposium on Advances in Computational Heat Transfer, Paper # CHT-12-SM04, pp. 1-25, Bath, England, July 1-6, 2012.
BARTHELAT, F.
Journal Publications
Barrett, C. J. and Barthelat, F., 2012, “The mechanical performance of a biomimetic nanointerface made of multilayered polyelectrolytes,” Cavelier, S., European Journal of Inorganic Chemistry, p 5380-5389.
Bekah, S., Rabiei, R. and Barthelat, F., 2012, "The micromechanics of biological and biomimetic staggered composites,” Journal of Bionic Engineering 9 (4) p. 446-456.
Poissant, J. and Barthelat, F., 2012, "In-situ mechanical testing of hydrated biological nanofibers using a nanoindenter transducer”, Experimental Mechanics, 52(9) p 1287-1295.
Khayer Dastjerdi, A., Pagano, M., Kaartinen, M.T., McKee, M.D. and Barthelat, F., 2012, "Cohesive behavior of soft biological adhesives: Experiments and modeling", Acta Biomaterialia 8 (9) p. 3349-3359.
Humburg, H., D. Zhu, S. Beznia and Barthelat, F., 2012, "Bio-inspired Tapered Fibers for Composites with Superior Toughness", Composites Science and Technology 72 (9) , p 1012-1019.
D. Zhu, C.F. Ortega, R. Motamedi, Szewciw, L. Vernerey, F. and Barthelat, F., 2012, "Structure and mechanical performance of a “modern” fish scale”, Advanced Biomaterials 14 (4) , p B185-B194 (Cover).
Books
Book Chapter: Rabiei R., Khayer Dastjerdi A., Mirkhalaf Valashani S. M. and Barthelat F., 2012, "The Hierarchical structure of biomimetic biomaterials", "Biomimetic Biomaterials" (Woodhead publications).
Book Chapter: S. M. Mirkhalaf Valashani, D. Zhu and F. Barthelat, 2012, "Biomimetic hard materials", "Engineered Biomimicry: Bioinspiration, Biomimetics, and Bioreplication" (Elsevier).
Conference Proceedings
“Biomimetic Tapered Fibers for Enhanced Composite Toughness”, Society for Experimental Mechanics Annual Conference, Costa Mesa, USA, June 11-14, 2012.
“Scalation Pattern Increases Penetration Resistance of Fish Skin in Striped Bass, Morone Saxatilis”, Society for Experimental Mechanics Annual Conference, Costa Mesa, USA, June 11-14, 2012.
“Interfacial Fracture Toughness of Nacre”, Society for Experimental Mechanics Annual Conference, Costa Mesa, USA, June 11-14, 2012.
“Direct Measurements of the Cohesive Behavior of Soft Biological Interfaces”, Society for Experimental Mechanics Annual Conference, Costa Mesa, USA, June 11-14, 2012.
"Net shape manufacturing of a novel cermet using self-propagating high temperature synthesis”, The Minerals, Metals & Materials Society (TMS) Annual Meeting, Orlando, FL, March 11-15, 2012.
"The Multiscale Mechanics of Scaled Fish Skin," 49th Annual Technical Conference, Society of Engineering Sciences, Georgia Tech, GA, October 10-12, 2012.
"A new method to measure the toughness of soft biological interfaces," 49th Annual Technical Conference, Society of Engineering Sciences, Georgia Tech, GA, October 10-12, 2012.
BERGTHORSON, J.M.
Journal Publications
Versailles, P. and Bergthorson, J.M., 2012, “Optimized laminar axisymmetrical nozzle design using a numerically-validated Thwaites method,” Journal of Fluids Engineering 134:101203-1-9.
Eaton, R., Zhang, B., Bergthorson, J.M., and Ng, H.D, 2012, “Measurement and chemical kinetic model predictions of detonation cell size in methanol-oxygen mixtures,” Shock Waves 22:173-178.
Gauthier, G.P., Watson, G.M.G., and Bergthorson, J.M., 2012, “An evaluation of numerical models for temperature-stabilized CH4/Air flames in a small channel,” Combustion Science & Technology 184:850-868.
Watson, G.M.G. and Bergthorson, J.M., 2012, “The effect of chemical energy release on heat transfer from flames in small channels,” Combustion & Flame 159:1239-1252.
Salusbury, S.D. and Bergthorson, J.M., 2012, “Experiments in diluted premixed turbulent stagnation flames for gas-turbine applications,” International Journal of Energetic Meterials and Chemical Propulsion, 11:165–180.
Conference Proceedings
Denman, B.M., Munzar, J.D. and Bergthorson, J.M., “An experimental and numerical study of the laminar flame speed of jet fuel surrogate blends,” In: Proceedings of the ASME Turbo Expo 2012, ASME paper GT2012-69917, Copenhagen, Denmark, 2012.
Salusbury, S.D. and Bergthorson, J.M., 2012, “Experiments in diluted premixed turbulent stagnation flames for gas-turbine engine applications,” 9th International Symposium on Chemical Propulsion, Quebec, QC, 2012.
Yavor, Y., Goroshin, S., Bergthorson, J.M., Frost, D., Stowe, R. and Ringuette, S.,“Aluminum-Water Reaction Kinetics at Temperatures up to 150 C,” 9th International Symposium on Chemical Propulsion, Quebec, QC, 2012.
Soo, M., Julien, P., Goroshin, S., Bergthorson, J.M. and Frost, D., “Effect of metal concentration on aluminum reactivity in combustion products of hydrocarbons,” 9th International Symposium on Chemical Propulsion, Quebec, QC, 2012.
Akih-Kumgeh, B. and Bergthorson, J.M., “Combustion chemical kinetic mechanism reduction using an Alternate Species Elimination Method (ASEM),” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
Denman, B.M., Munzar, J.D. and Bergthorson, J.M., “Flame propagation of jet fuel surrogate components and blends,” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
Chung, G.A., Akih-Kumgeh, B. and Bergthorson, J.M., “NOx formation and flame velocity profiles of iso- and n- isomers of butane and butanol,” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
Watson, G.M.G., Gauthier, G.P. and Bergthorson, J.M., “The effect of flame-wall heat transfer on the propagation of flames in small heated channels,” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
Palecka, J., Goroshin, S., Higgins, A.J., Frost, D., Bergthorson, J.M., Julien, P. and Soo, M., “Quenching distance measurements in aluminum-methane-air laminar flames,” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
Julien, P., Soo, M., Goroshin, S., Bergthorson, J.M., and Frost, D., “Aluminium Dust Combustion in Premixed Methane-Air Flames,” In: Proceedings of the 2012 Spring Technical Meeting of the Combustion Institute/Canadian Section, Toronto, ON, 2012.
CORTELEZZI, L.
Journal Publications
Gubanov, O. and Cortelezzi, L., 2012, "On the cost efficiency of mixing optimization," Journal of Fluid Mechanics, vol. 692, pp. 112–136.
Conference Proceedings
Mydlarski, L., Germaine, E. and Cortelezzi, L., "Small-scale statistics of passive scalars released from concentrated sources in turbulent channel flow", 65th Annual Meeting of the APS Division of Fluid Dynamics, Sunday–Tuesday, San Diego, California, November 18–20, 2012.
Cortelezzi, L., Germaine, E. and Mydlarski, L., "Initial condition dependence of the mixing of a scalar in turbulent channel flow'', 9th Europrean Fluid Mechanics Conference, University of Rome "Tor Vergata", Rome, Italy, September 9-13, 2012.
FORBES, J.R.
Journal Publications
Forbes, J.R. and Damaren, C. J., 2012, “Single-Link Flexible Manipulator Control Accommodating Passivity Violations: Theory and Experiments,” IEEE Transactions on Control Systems Technology.
Forbes, J.R., 2012, “Dual Approaches to Strictly Positive Real Controller Synthesis with a H2 Performance Using Linear Matrix Inequalities,” International Journal of Robust and Nonlinear Control.
Conference Proceedings
Walsh, A. and Forbes, J.R., “Dynamic Modelling and Control of Flexible Robotic Space Manipulators with Telescoping Booms,” International Astronautical Congress, Sponsored by the International Astronautical Federation, Naples, Italy, October 1 – 5, 2012.
Yang, Y., Sharf, I. and Forbes, J. R., “Nonlinear Optimal Control of a Holonomic Airship,” Guidance, Navigation, and Control Conference, Sponsored by the AIAA. Awarded “best presentation” in Control in Aerospace Robotics 1, Minneapolis, MN, August 13-16, 2012.
Battiston, A., Forbes, J. R., Shmuel, B. and Damaren, C. J., “Power Consumption and Attitude Control in the Presence of Reaction Wheel Failure while using Reaction Wheels and Magnetic Torque Rods in Tandem,” 16th CASI Astro Conference, Sponsored by CASI, Quebec City, QC, April 24-26, 2012.
FRIED, E.
Journal Publications
Kim, T.-Y., Puntel, E., Fried, E., 2012, “Numerical study of the wrinkling of a stretched thin sheet,” International Journal of Solids and Structures 49, 771–782.
Chen, Y.-C., Fried, E., Tortorelli, D. A., 2012, “Stability of a thin elastic film close to a rigid plate,” Journal of the Mechanics and Physics of Solids 60, 904–920.
Kim, T.-Y., Rebholz, L. G., Fried, E., 2012, “A deconvolution enhancement of the Navier–Stokes-αβ model,” Journal of Computational Physics 231, 4015–4027.
Capriz, G., Fried, E., Seguin, B., 2012, “Constrained ephemeral continua,” Rendiconti Lincei – Matematica e Applicazioni 23, 157–195.
Fried, E., Jabbour, M. E. 2012, “Dynamical equations for the contact line of an evaporating or condensing sessile drop,” Journal of Fluid Mechanics 703, 204–237.
B. Seguin, E. Fried. 2012, “Statistical foundations of liquid-crystal theory—I. Discrete systems of rod-like molecules,” Archive for Rational Mechanics and Analysis 206, 1039– 1072.
T.-Y. Kim, J. Dolbow, E. Fried. 2012, “Numerical study of the grain-size dependent Young's modulus and Poisson's ratio of bulk nanocrystalline materials,” International Journal of Solids and Structures 49, 3942–3952.
FROST, D.L.
Journal Publications
Frost, D.L., Gregoire, Y., Petel, O.E., Goroshin, S., and Zhang, F., 2012, “Particle jet formation during explosive dispersal of solid particles,” Physics of Fluids, Vol. 24, Iss. 9, 091109, URL: http://dx.doi.org/10.1063/1.4751876.
Petel, O.E., Ouellet, S., Higgins, A.J., and Frost, D.L., 2012, “The elastic-plastic behavior of foam under shock loading,” Shock Waves, URL: DOI: 10.1007/s00193-012-0414-7.
Soo, M., Julien, P., Goroshin, S., Bergthorson, J.M., and Frost, D.L., 2012, “Stabilized flames in hybrid aluminum-methane-air mixtures,” Proceedings of the Combustion Institute 34,URL: http://dx.doi.org/10.1016/j.proci.2012.05.044.
Petel, O.E., Frost, D.L., Higgins, A.J., and Ouellet, S., 2012, “Formation of a disordered solid via a shock-induced transition in a dense particle suspension,” Physical Review E, Vol. 85, 021401.
Jetté, F.-X., Goroshin, S., Frost, D.L., Higgins, A.J., and Lee, J.J., 2012, “On the Relationship between Shock and Thermal Initiating Conditions for Various Reactive Powder Mixtures,” Propellants, Explosives and Pyrotechnics, Vol. 37, No. 3, 345-358.
Conference Proceedings
Frost, D.L., Ruel, J.-F., Zarei, Z., Goroshin, S., Gregoire, Y., Zhange, F., Milne, A., and Longbottom, A., “Explosive formation of coherent particle jets,” Proc. 22nd International Symposium on Military Aspects of Blast and Shock (MABS), Bourges, France, Nov. 5-9, 2012.
Petel, O.E., Ouellet, S., Loiseau, J., Marr, Bradley J., Higgins, A.J., and Frost, D.L., “Ballistic impact of shear thickening fluids: a competition of density and rheology,” Proc. Personal Armour Systems Symposium (PASS2012), Nuremberg, Germany, September 17-21, 2012.
Yavor, Y., Goroshin, S., Bergthorson, J., Frost, D.L., Stowe, R., and Ringuette, S., “Aluminum-water reaction kinetics in the 50-200°C temperature range,” Proc. 9th International Symposium on Special Topics in Chemical Propulsion, Quebec City, July 9-13, 2012.
Soo, M., Julien, P., Goroshin, S., Bergthorson, J., and Frost, D.L., “Effect of metal concentration on aluminum reactivity in combustion products of hydrocarbons,” Proc. 9th International Symposium on Special Topics in Chemical Propulsion, Quebec City, July 9-13, 2012.
Capozzi, A., Nabavi, A., Goroshin, S., Frost, D.L., and Barthelat, F., “Combustion synthesis of chromium sulfide metal-ceramic composites for ballistic protection”, Proc. 9th International Symposium on Special Topics in Chemical Propulsion, Quebec City, July 9-13, 2012.
Nabavi, A., Cappozi, A., Goroshin, S., Frost, D.L., and Barthelat, F., “Net shape manufacturing of a novel cermet using self-propagating high-temperature synthesis,” Proc. EPD Congress, 2012, DOI: 10.1002/9781118359341.ch27.
Nabavi, A., Capozzi, A., Higgins, A., Frost, D., Goroshin, S., Barthelat, F., Combustion Synthesis of a Chromium/Chromium Sulfide Ceramic-Metal Composite, In: Proceedings of the 2012 Combustion Institute Canadian Section Spring Technical Meeting, Toronto, ON, May 13-16, 2012.
Palecka, J., Goroshin, S., Higgins, A., Frost, D., Bergthorson, J.M., Julien, P., Soo, M., Quenching Distance Measurement in Aluminum-Methane-Air Laminar Flames, In: Proceedings of the 2012 Combustion Institute Canadian Section Spring Technical Meeting, Toronto, ON, May 13-16, 2012.
Julien, P., Soo, M., Goroshin, S., Bergthorson, J., Frost, A., Aluminium Dust Combustion in Premixed Methane-Air Flames, In: Proceedings of the 2012 Combustion Institute Canadian Section Spring Technical Meeting, Toronto, ON, May 13-16, 2012.
HABASHI, W.G.
Journal Publications
Fossati, M., Habashi, W.G. and Baruzzi, G.S., 2012, “FENSAP-ICE: “Simulation of Supercooled Large Droplets Impingement via Reduced Order Technology”, AIAA Journal of Aircraft, Vol. 49, No. 2, pp. 600-610, March-April.
Zeppettelli, D. and Habashi, W.G., 2012,“In-Flight Icing Risk Management Through Computational Fluid Dynamics-Icing Analysis”, AIAA Journal of Aircraft, Vol. 49, No. 2, pp. 611-621, March-April.
Fossati, M., Khurram, R.A. and Habashi, W.G., 2012, “An Arbitrary Lagrangian-Eulerian Mesh Movement Scheme for Long-term In-flight Ice Accretion”, International Journal of Numerical Methods in Fluids, Vol. 68, pp. 958-976, February.
Zhang, S., Khurram, R.A., El-Kerdi, O. and Habashi, W.G., 2012, “FEM Analysis of In-flight Ice Break-up”, Finite Elements in Analysis and Design, Vol. 57, pp. 55–66.
Zhang, Y., Khurram, R.A. and Habashi, W.G., 2012, “Multiscale Finite Element Method Applied to Detached-Eddy Simulation for Computational Wind Engineering”, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Springer Verlag, Vol. 117, pp. 483-492.
Khurram, R.A., Zhang, Y. and Habashi, W.G, 2012,“Multiscale Finite Element Method Applied to the Spalart-Allmaras Turbulence Model for 3D Detached-Eddy Simulation”, Computer Methods in Applied Mechanics and Engineering, Vol. 233–236, pp. 180–193.
Reid, T., Baruzzi, G.S., Aliaga, C.N. and Habashi, W.G. 2012, “FENSAP-ICE: Unsteady Conjugate Heat Transfer Simulation of Electrothermal De-Icing”, AIAA Journal of Aircraft, Vol. 49, No. 4, pp. 1101-1109, July-August.
Conference Proceedings
Habashi, W.G., Borna, A., McClure, G., Keynote Lecture, “CFD Predictions of Cable Galloping Under Icing Conditions”, Proceedings of the 8th International Conference on Engineering Computational Technology, Dubrovnik, Croatia, September 2012.
Fossati, M., Habashi, W.G. and Vigevano, L., “Assessment of a Reduced Order Methodology for the Parametric Analysis of Rotor Aerodynamics”, 38th European Rotorcraft Forum, Amsterdam, The Netherlands, September 2012.
Keyhan, H., McClure, G., and Habashi, W.G., “Hybrid RANS/LES Method for Fluid-Structure Interaction Simulations of Tall Buildings”, International Conference on Advances in Wind and Structures (AWAS’12), Seoul, South Korea, August 2012.
Zhang, Y., Khurram, R.A. and Habashi, W.G., “Hybrid RANS/LES method for FSI simulations of tall buildings”, 2012 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM12), Volume of Abstracts, Techno-Press, Seoul, Korea, August, 2012, page 310 (ed. Chang-Koon Choi).
Shiping, Z., Khurram, R.A. and Habashi, W.G., “3D modeling of in-flight ice break-up”, Paper FS02-050, 23rd International Congress of Theoretical and Applied Mechanics (ICTAM12), Abstract Book, Beijing, China, August 2012, page 94 (eds. Yilong Bai, Jianxiang Wang, Daining Fang).
Pourbagian, M. and Habashi, W.G., “Parametric Analysis of Energy Requirements of In-Flight Ice Protection Systems,” Proceedings of the 20th Conference of the CFD Society of Canada, Calgary, June 2012.
Zhang, S., R.A. Khurram and Habashi, W.G., “FENSAP-ICE: Computational Modeling of Ice Cracking and Break-up from Helicopter Blades,” 42nd AIAA Fluid Dynamics Conference, New Orleans, June 2012.
Pourbagian, M. and Habashi, W.G., “Power and Design Optimization of Electro-Thermal Anti-Icing Systems,” AIAA Paper 2012-2677, 4th AIAA Atmospheric and Space Environments Conference, New Orleans, June 2012.
Fouladi, H. and Habashi, W.G., “FENSAP-ICE Modeling of Ice Accretion on a Helicopter Fuselage in Forward Flight,” AIAA Paper 2012-2674, 4th AIAA Atmospheric and Space Environments Conference, New Orleans, June 2012.
Habashi, W.G., Keynote Lecture, “Simulation of In-Flight Icing and De-Icing by Conjugate Heat Transfer Methods,” Istanbul, Turkey, May 2012.
HALLER, G.
Conference Proceedings
Haller, G. and Beron-Vera, F.J., “Geodesic theory of transport barriers in two-dimensional flows”, 2012, Physica D, 241 1680-1702.
Olascoaga, J. and Haller, G., “Forecasting sudden changes in environmental contamination patterns”, 2012, Proc. National Acad. Sci.,109 4738-4743.
Farazmand, M. and Haller, G., “Computing Lagrangian Coherent Structures from variational LCS theory,” 2012, Chaos. 22 013128.
Farazmand, M. and Haller, G., “Erratum and Addendum to `A variational theory of hyperbolic Lagrangian Coherent Structures,” 2011-2012, Physica D 240 574-598.’, Physica D, 241 439-441.
HIGGINS, A.J.
Journal Publications
Aïssa, B., Tagziria, K., Haddad, E., Jamroz, W., Loiseau, J., Higgins, A.J., Asgar-Khan, M. Hoa, S. V., Merle, P. G., Therriault, D., and Rosei, F., 2012, “The Self-Healing Capability of Carbon Fibre Composite Structures Subjected to Hypervelocity Impacts Simulating Orbital Space Debris,” ISRN Nanomaterials, Vol. 2012, Article ID 351205, 16 pages.
Verreault, J., Higgins, A.J., and Stowe R.A., 2012, “Formation and Structure of Steady Oblique and Conical Detonation Waves,” AIAA Journal, Vol. 50, No. 8, 2012, pp. 1766-1772.
Tang, F.D., Higgins, A.J., and Goroshin, S., 2012, “Propagation limits and velocity of reaction-diffusion fronts in a system of discrete random sources,” Physical Review E, Vol. 85, Issue 3, 036311.
Jetté, F.X., Goroshin, S., Frost, D.L., Higgins, A.J., and Lee, J.J., 2012, “On the Relationship Between Shock and Thermal Initiating Conditions for Various Reactive Powder Mixtures,” Propellants, Explosives, Pyrotechnics, Vol. 37, Issue 3, 2012, pp. 345–358.
Petel, O.E. Frost, D.L., Higgins A.J., and Ouellet, S., 2012, “Formation of a disordered solid via a shock-induced transition in a dense particle suspension,” Physical Review E, Vol. 85, Issue 2, 2012, 021401.
Loiseau, J., Szirti, D., Higgins, A.J., and Tanguay, V., 2012, “Experimental technique for generating fast high-density shock waves with phased linear explosive shock tubes,” Shock Waves, Vol. 22, No, 1, pp. 85-88.
Books
Book Chapter: Higgins, A.J., 2012, “Steady One-Dimensional Detonations,” Detonation Dynamics (ed. F. Zhang), Springer.
Conference Proceedings
Wagner, C., Palecka, J., Higgins, A.J., Goroshin, S, and Tang, F.D., “Dimensional Scaling of Quenching for Flame Propagation in Random Media,” 63rd International Astronautical Congress, Naples, Italy, October 1-5, 2012.
Loiseau, J., Huneault, J., and Higgins, A.J., “Development of a Linear Implosion-driven Hypervelocity Launcher,” 12th Hypervelocity Impact Symposium, Baltimore, Maryland, September 16-20, 2012.
Loiseau, J., Huneault, J., Higgins, A.J., and Goroshin, S., “Experimental Development of a Hypervelocity Launcher Employing a Cumulative Explosive Shock Tube”, 11th Zababakhin Scientific Talks, Snezhinsk, Russia, April 16 - 20, 2012.
Palecka, J., Goroshin, S., Higgins, A.J., Frost, D., Bergthorson, J.M., Julien, P., and Soo, M., “Combustion Quenching Distance Measurement in Aluminum-Methane-Air Laminar Flames,” Combustion Institute/Canadian Section Spring Technical Meeting, Toronto, Ontario, May 13-16, 2012.
Nabavi, A., Capozzi, A., Higgins, A.J., Frost, D., Goroshin, S., and Barthelat, F., “Synthesis of a Chromium/Chromium Sulfide Ceramic-Metal Composite,” Combustion Institute/Canadian Section Spring Technical Meeting, Toronto, Ontario, May 13-16, 2012.
Wagner, C. Palecka, J., Goroshin, S., Higgins, A. J., and Tang, F.-D.,“Dimensional Scaling of Quenching for Flame Propagation in Random Media,” Combustion Institute/Canadian Section Spring Technical Meeting, Toronto, Ontario, May 13-16, 2012.
HUBERT, P.
Journal Publications
Khoun, L., Challagulla, K., Yamanaka, T., Lessard, L., Hubert, P., 2012, “Thermo-mechanical Properties of 5-Harness Satin Fabric Composites”, Journal of Composite Materials, 46, 25, 3121–3136.
Mirjalili, V., Yourdkhani, M., Hubert, P., 2012,“Dispersion Stability in Carbon Nanotube Modified Polymers and its Effect on the Fracture Toughness”, Nanotechnology. 23, 315701.
Martinez-Rubi, Y., Gonzalez-Dominguez, J., Ansón-Casaos, A., Kingston, C., Martinez, M., Daroszewska, M., Barnes, M., Hubert, P., Cattin, C., Simard, B., 2012, “Tailored SWCNT Functionalization Optimized for Compatibility with Epoxy Matrices”, Nanotechnology. 23, 28, 285701.
Centea, T., Hubert, P., 2012, “Modelling the Effect of Material Properties and Process Parameters on Tow Impregnation in Out-of-autoclave Prepregs”, Composites Part A, 43, 9, 1505-1513.
Rahmat, M. and Hubert, P., 2012,“Molecular Dynamics Simulation of Single-Walled Carbon Nanotube – PMMA Interaction”, Journal of Nano Research, 18-19, 117-128.
Rahmat, M., Ghiasi, H., Hubert, P., 2012,“Interaction Energy and Polymer Density Profile in Nanocomposites: A Coarse Grain Simulation Based on Interaction Stress”, Polymer Chemistry, 3, 1158-1167.
Dube, M. Hubert, P., Gallet, J., Stavrov, D., Bersee, H., Yousefpour, A., 2012, “Metal Mesh Heating Element Size Effect in Resistance Welding of Thermoplastic Composites”, Journal of Composite Materials, 46, 8, 911-919.
Ashrafi, B., Das, K., Le Faive, R., Hubert, P. and Vengallatore, S., 2012, "Measuring the Elastic Properties of Freestanding Thick Films Using a Nanoindenter-Based Bending Test", Experimental Mechanics, 52, 4, 371-378.
Palardy, G., Haider, M., Ruiz, E., Hubert, P. Lessard, L., 2012, “Numerical Simulations for Class A Surface Finish in Resin Transfer Molding Process”, Composites Part B, 43, 2, 819-824.
Rahmat, M., Ghiasi, H. and Hubert, P., 2012, "An Interaction Stress analysis of Nanoscale Elastic Asperity Contacts", Nanoscale, 4, 1, 157-166.
Books
Book Chapter: Hubert, P., Fernlund, G., Poursartip, A., 2012, “Autoclave Processing“, Manufacturing techniques for polymer matrix composites (PMCs), Editors S. Advani, K-T Hsiao, Woodhead Publishing Limited.
Conference Proceedings
Hubert, P.," Out-of-autoclave Prepreg Research for Large Scale Aerospace Applications", 6th International Symposium on Composites Manufacturing, ISCM 2012, Stade, Germany, October 24-25, 2012.
Chen, Z. and Hubert, P., “Pull-Through Failure of Bolted Composite Joints”, 27th ASC Annual Technical Conference, Arlington, TX, October 1-3, 2012.
Picher-Martel, G.-P. and Hubert, P., “Squeeze Flow Behaviour of Carbon/PEEK Randomly-oriented Strips Compounds under Transverse Compaction”, 27th ASC Annual Technical Conference, Arlington, TX, October 1-3, 2012.
Phillips, S., Kuo, P‐Y., Lessard, L., Sain, M. Hubert, P.,“Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/epoxy Composites Manufactured by Resin Infusion”, 11th International Conference on Flow Processes in Composite Materials, Auckland, New-Zealand, July 9-12, 2012.
Kratz, J., Hubert, P.,“Modelling the Internal Core Pressure During Cure of Out‐of‐autoclave Honeycomb Panels”, 11th International Conference on Flow Processes in Composite Materials, Auckland, New-Zealand, July 9-12, 2012.
Centea, T., Hubert, P., “The Effect of Out‐time and Cure Cycle on the Consolidation of Out‐of‐autoclave Prepregs”, 11th International Conference on Flow Processes in Composite Materials, Auckland, New-Zealand, July 9-12, 2012.
Palardy, G., Trudel-Boucher, D., Hubert, P.,“Development of a Post-processing Method to Tailor the Mechanical Properties of Carbon Nanotube/nylon Fibres”, ECCM15, Venice, Italy, June 24-28, 2012.
Phillips, S., Baets, J., Lessard, L., Hubert, P., Verpoest,I., “Experimental Investigation into Void Content and Mechanical Properties of Cured Flax/Epoxy Prepregs”, ECCM15, Venice, Italy, June 24-28, 2012.
Wedekind, M., Krempl, P., Baier, H., Khoun, L., Hubert, P.,“Impact Behavior of Thin Thermoplastic Composites Dependant on Manufacturing Parameters and Layup”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Gagné Brulotte, X., Hubert, P., Hojjati, M., 2012, “Aspects of In-Situ Consolidation of Thermoplastic Laminates Manufactured by Automated Tape Placement”, SAMPE 2012, Baltimore, MD, May 21-24.
Selezneva, M., Picher-Martel, G.-P., Landry, B., Lessard, L., Hubert, P., Trudel-Boucher, D., Khoun, L., Roy, S., Hojjati, M., “Compression Moulding of Discontinuous-fibre carbon/PEEK Composites: Study of Mechanical Properties”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Khoun, L., Trudel-Boucher, D., Wedekind, M., Demaria, C., Baier, H., Hubert, P.,“Design and Manufacturing of a Representative Thermoplastic Composite Primary Aerospace Structure”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Ashrafi, B., Johnston, A., Jakubinek, M.B., Martinez-Rubi, Y., Simard, B., Hubert, P., “Effect of Single-Walled Carbon Nanotubes on Processing and Property Enhancement of Epoxy Adhesives and Laminates”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Centea, T., Hubert, P.,“Effect of Process Deficiencies on Out-of-Autoclave Prepreg Consolidation”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Kratz, J., Hubert, P.,“Evaluation of Core Material on Skin Quality for Out-of-Autoclave Honeycomb Panels”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Centea, T., Hughes, S.-M., Payette, S., Kratz, J., Hubert, P., “Scaling Challenges Encountered with Out-of-Autoclave Prepregs”, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, April 22-26, 2012.
Ramachandramoorthy, R., Mousavand, T., Hubert, P., “Laser Transmission Welding of Thermoplastic Tubes and Plates”, ANTEC 2012, Orlando, FL, April 2-4, 2012.
Mousavand, T., Dini, M., Carreau, P. J., Hubert, P., Kamal, M. R., “Hydrolytic Depolymerization of PET during Extrusion”, ANTEC 2012, Orlando, FL, April 2-4, 2012.
KOKKOLARAS, M.
Conference Proceedings
Issakson, O., Larsson, T., Kokkolaras, M. and Bertoni, M., 2012, "Simulation Driven Design for Product-Service Systems," Proceedings of the 4th CIRP Conference on Industrial Product Service Systems, Tokyo, Japan, November 8-9.
Kang, N., Kokkolaras, M. and Papalambros, P., 2012,"Optimal Design of Commercial Vehicle Systems Using Analytical Target Cascading," Proceedings of the 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, Indiana, September 17-19, paper no. AIAA-2012-5524.
KÖVECSES, J.
Journal Publications
Shen, J.J., Kalantari, M., Kövecses, J., Angeles, J. and Dargahi, J., 2012, “Viscoelastic Modelling of the Contact Interaction Between a Tactile Sensor and Atrial Tissue,” IEEE Transactions on Biomedical Engineering, Vol. 59, No. 6, pp. 1727-1738.
Font-Llagunes, J.M., Barjau, A., Pamies-Vila, R., and Kövecses, J., 2012, “Dynamic Analysis of Impact in Swing-through Crutch Gait Using Impulsive and Continuous Contact Models,” Multibody System Dynamics, Vol. 28, No. 3, pp. 257-282.
Kalantari, M., Dargahi, J., Kövecses, J., Mardasi, M.G., and Nouri, S., 2012, “A New Approach for Modeling Piezoresistive Force Sensors Based on Semiconductive Polymer Composites,” IEEE/ASME Trans. Mechatronics, Vol. 17, No. 3, pp. 572-581.
Conference Proceedings
Ghotbi, B., Gonzalez, F., Kövecses, J., and Angeles, J., "Vehicle-Terrain Interaction Models for Analysis and Performance Evaluation of Wheeled Rovers,” 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, Vilamoura, Algarve, Portugal, October 7-12, 2012.
Shayan Amin, S., Kovacs, L.L., and Kövecses, J.,“Dynamic Behaviour and Stability Analysis of Multibody Haptic Systems”, ASME 2012 International Design Engineering Technical Conferences, 1st Biennial International Conference on Dynamics for Design, Chicago, Illinois, August 12-15, 2012.
Gonzalez, F. and Kövecses, J., “Load Assessment and Analysis of Impacts in Multibody Systems”, The 2nd Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, May 29-June 1, 2012.
Gonzalez, F. and Kövecses, J.,“Use of Penalty Formulations in the Dynamic Simulation of Redundantly Constrained Multibody Systems”, The 2nd Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, May 29-June 1, 2012.
Ghotbi, B., Gonzalez, F., Kövecses, J. and Angeles, J.,“Vehicle-Terrain Interaction Model for Analysis and Performance Evaluation”, The 2nd Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, May 29-June 1, 2012.
Kovacs, L.L., Bencsik, L. and Kövecses, J., “Dynamics Analysis of Under-actuated Mechanical Systems for Design Optimization and Control Performance”, The 2nd Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, May 29-June 1, 2012.
Gholami, F., Kövecses, J., and Font-Llagunes, J.M.,“Dynamic Analysis of Foot Models for Human Locomotion”, The 2nd Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, May 29-June 1, 2012.
Azimi, A., Holz, D., Kövecses, J., Angeles, J., and Teichmann, M., “Efficient Dynamics Modeling for Rover Simulation on Soft Terrain”, 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January 9-12, 2012.
LEE, J.H.S.
Journal Publications
Lee, J.H.S., Jesuthasan, A., Ng, H.D., 2012, Near limit behavior of the detonation velocity. Proc. Combust. Inst. 34, In press, doi: 10.1016/j.proci.2012.05.036.
Zhang, B., Ng, H.D., Lee, J.H.S., 2012, “Dynamic detonation parameters in C2H2/N20/Ar mixtures,” Combust, Flame, In press, doi: 10.1016/j.combustflame.2012.06.010.
Zhang, B., Ng, H.D,. Lee, J.H.S., 2012, “Measurement and scaling analysis of critical energy for direct initiation of gaseous detonations,” Shock Waves 22(3): 275-279.
Zhang, B., Ng, H.D., Lee, J.H.S., 2012, “Measurement of effective blast energy for direct initiation of spherical gaseous detonations from high-voltage spark discharge,” Shock Waves 22(3): 1-7.
Kamenskihs, V., Lee, J.H.S., 2012, “Effect of an axial field on detonation waves,” Combust. Flame. 159(9): 2967-2973.
LEE, T.
Journal Publications
Lee, T., and Su, Y.Y., 2012, "Low-Reynolds-number aerodynamic load determination via line integral of velocity obtained with particle image velocimetry," Experiments in Fluids, Vol. 53, Issue 5, pp. 1177-1190.
Lee, T., and Su, Y.Y., 2012, "Aerodynamic performance of a wing with a deflected tip-mounted reverse half-delta wing," Experiments in Fluids, Vol. 53, Issue 5, pp. 1221-1232.
Lee, T., and Su, Y.Y., 2012, "Pitching airfoil with combined unsteady trailing-edge flap deflection and Gurney flap," AIAA Journal, Vol. 50, No. 2, pp. 503-507.
Lee, T., and Su, Y.Y., 2012, "Wingtip vortex control via the use of a reverse half-delta wing," Experiments in Fluids, Vol. 52, Issue 6, pp. 1593-1609.
LEGRAND, M.
Journal Publications
Legrand, M., Batailly, A., Magnain, B., Cartraud, P. and Pierre, C., 2012, “Full three-dimensional investigation of structural contact interactions in turbomachines,” Journal of Sound and Vibration, 331(11), 2578-2601.
Batailly, A., Legrand, M., Millecamps, A. and Garcin, F., 2012, “Numerical-Experimental Comparison in the Simulation of Rotor/Stator Interaction Through Blade-tip/Abradable Coating Contact,” Journal of Engineering for Gas Turbines and Power, 134(8).
Batailly, A., Cuny, M., Legrand, M., Philippon, S., 2012, “Numerical-experimental confrontation in the simulation of tool/abradable material interaction,” Journal of Engineering for Gas Turbines and Power.
Conference Proceedings
Batailly, A., Cuny, M. and Legrand, M., “Numerical simulation of tool/abradablematerial interaction experiments,” Proceedings of ASME Turbo Expo 2012, GT2012-68171, Copenhagen, Denmark, June 11–16, 2012.
Batailly, A., Legrand, M., Millecamps, A and Garcin, F., “Numerical study of a rotor/stator interaction case experimentally simulated with an industrial compressor,” Proceedings of ASME Turbo Expo 2012, GT2012-68173, Copenhagen, Denmark, June 11–16, 2012.
Jones, S. and Legrand, M., “The wavelet-Galerkin method for solving vibratory PDE’s with spatially dependent variables,” 19th International Congress on Sound and Vibration, Vilnius, Lithuania, July 8-12, 2012.
Breslavsky, I., Amabili, M., and Legrand, M., “Physically and geometrically nonlinear vibrations of thin rectangular plates,” Proceedings of the 8thEuropean Solid Mechanics Conference, Graz, Austria, July 9–13, 2012.
LESSARD, L.
Journal Publications
Taghvaeipour, A., Angeles, J. and Lessard, L., 2012,“On the Elastostatic Analysis of Mechanical Systems,” Mechanism & Machine Theory, Vol. 58, pp. 202-216.
Arian Nik, M., Fayazbakhsh, K., Pasini, D. and Lessard, L., 2012, “Surrogate-based multi-objective optimization of a composite laminate with curvilinear fibers,” Composite Structures, Vol. 94, pp. 2306-2313.
Palardy, G., Hubert, P., Ruiz, E., Haider, M. and Lessard, L., 2012, “Numerical simulations for class A surface finish in resin transfer molding process,” Composites B: Engineering, 2012, Vol. 43, No. 2, pp. 819-824.
Phillips, S. and Lessard, L., 2012, “Application of Natural Fiber Composites to Musical Instrument Top Plates,” Journal of Composite Materials, Vol. 46, No. 2, January, pp. 145-154.
Conference Proceedings
Ali, M.S., Mirza, M.S. and Lessard, L., “Bond Characteristics Between Hybrid FRP Laminates and Cast-in-Place Concrete – An Experimental Study”, International Conference on Advanced Concrete Technology & its Applications (ACTA-2012), Islamabad, Pakistan, November 6-7, 2012.
Phillips, S., Demaria C., Hubert, P. and Lessard, L., “Modelling and experimental characterization of the transverse permeability of flax, hemp and kenaf fabrics,” 11th International Conference on Flow Processing in Composite Materials, Auckland, New Zealand, July 9-12, 2012.
Fayazbakhsh, K., Lessard, Larry and Pasini, D., “The effect of gaps and overlaps on in-plane stiffness and the buckling load of an optimum variable stiffness laminate,” 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
Lessard, L., Yamanaka, T., Ghiasi, H., Feret, V. and Hubert, P., "Multiscale Finite Element Analysis of Delamination Growth in a Double Cantilever Beam Specimen Made of Woven Fabric Composite", 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
Phillips, S., Baets, J., Lessard, L. and Verpoest, I., “Experimental investigation into void content and mechanical properties of cured flax/epoxy prepregs,” 15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
Ali, S., Mirza, S. and Lessard, L., “Bond Characteristics between FRP Composite Laminate and Pre-stressed Concrete,” ACMBS-VI conference, Kingston, May 22-25, 2012.
Selezneva, M., Picher-Martel, G-P., Landry, B., Trudel-Boucher, D., Roy, S., Khoun, L., Hojjati, M., Lessard, L. And Hubert, P., “Compression Moulding of Discontinuous-Fibre Carbon/Peek Composites: Study of Mechanical Properties,” Sampe Conference, Baltimore, May 21-24, 2012.
Phillips, S., Kuo, P-Y., Lessard, L., Hubert, P., Sain, M. and Yan, N.,“Characterization of Flax Fabrics and Nanocellulose Modified Epoxy for the Development of Multi-scale Biocomposites by Resin Infusion,” 12th International Conference on Biocomposites, Niagara Falls, Canada, May 6-8, 2012.
Ali, S., Mirza, S. and Lessard, L.,“Bond Characteristics between FRP Composite Laminate and Pre-stressed Concrete,” CEGSS 19th Annual Conference, Montreal, Canada, March 30, 2012.
LIU, Xinyu
Journal Publications
Wen, Q., Po, M., Hulme, E., Chen, S., Liu, X.Y., Gershow, M., Leifer, A., Butler, V., Fang-Yen, C., Schafer, W., Whitesides, G.M., Wyart, M., Chklovskii, D., Zhen, M., and Samuel, A., 2012, “Proprioceptive couplings within motor neurons drive C. elegans forward locomotion,” Neuron, Vol. 76, No. 4, pp. 750–761.
Liu, X.Y., Shi, J.Y., Zong, Z., Wan, K.T., and Sun, Y., 2012,“Elastic and viscoelastic characterization of mouse oocytes using micropipette indentation,” Annals of Biomedical Engineering, Vol. 40, No. 10, pp. 2122–2130.
Books
Book Chapter: Lu, Z., Liu, X.Y., Zhang, X.P., Leung, C., Esfandiari, N., Casper, R.F., and Sun, Y., 2012, “Automated robotic intracytoplasmic sperm injection,” Practical Manual of In Vitro Fertilization: Advanced Methods and Novel Devices, eds. Z.P. Nagy, A.C. Varghese, and A. Agarwal, Springer-Verlag, invited chapter, pp. 353-359.
MATEESCU D.
Conference Proceedings
Mateescu, D., Panahi, A., Wang C. and Scholz O., “Analysis of steady and unsteady flows past airfoils in the proximity of the ground at low Reynolds numbers,” Proceedings of the 30th AIAA Applied Aerodynamics Conference, New Orleans, Louisiana, USA, 25-28 June 2012.
Panahi, A. and Mateescu, D., “Steady and unsteady three-dimensional flows in confined configurations with constant and variable inflow velocity,” Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Houston, Texas, U.S.A., 9-15 November 2012.
Mateescu, D., “Analysis of the effect of ground proximity on the steady and unsteady flows past airfoils at low Reynolds numbers,” Invited Plenary Lecture, Proceedings of the International Conference of Aerospace Sciences "AEROSPATIAL 2012", Bucharest, October 2012.
Han, Y., Mateescu, D. and Misra, A. K., “Study of aerospace structures with bonded piezoelectric strips subjected to unsteady aerodynamic loads for structural health monitoring,” Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, Georgia, USA, 19-21 September 2012.
Mateescu, D., Scholz, O. and Wang, C., “Analysis of the effect of ground proximity on the unsteady flows past oscillating airfoils at low Reynolds numbers,” Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics XXIII ICTAM-2012, Beijing, China, 19-24 August 2012.
Mirmohammadi, T., Misra, A. K. and Mateescu, D., “ Control of oscillations of a wing subjected to 3D unsteady subsonic aerodynamic loads using piezoelectric actuators,” Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, Georgia, USA, 19-21 September 2012.
Mateescu D., Panahi A. and Roy V., “Analysis of three-dimensional confined laminar flows with multiple flow separation regions,” Proceedings of the 50th AIAA Aerospace Sciences Meeting, AIAA Applied Aerodynamics Conference, Nashville, Tennessee, USA, 9-12 January 2012.
Mateescu, D., Scholz, O. and Wang, C, “Aerodynamics of airfoils at low Reynolds numbers in the proximity of the ground,” Proceedings of 12th Pan American Congress of Applied Mechanics - PACAM XII, Port of Spain, Trinidad, 2-6 January 2012.
MISRA, A.K.
Journal Publications
Mashayekhi, M.J. and Misra, A.K., 2012, “Tether assisted near earth object diversion. Acta Astronautica,” Vol. 72, No. 2, pp. 71-77.
Nobari, N.A. and Misra, A.K., 2012, “Attitude dynamics and control of a satellite using a redundant set of fluid rings,” Journal of Guidance, Control and Dynamics, Vol. 35, pp. 1855-1864.
Nobari, N.A. and Misra, A.K., 2012, “A hybrid attitude controller consisting of electromagnetic torque rods and an active fluid ring,” Acta Astronautica, doi: 10.1016/j.actaastro.2012.12.012.
Conference Proceedings
Woo, P. , Misra, A.K. and Keshmiri, M., “On the planar motion in the full two-body problem,” AAS / AIAA Space Flight Mechanics Conference, Charleston, South Carolina, January 29 - February 2, , 2012, Paper No. AAS-12-134.
Paak, M., Paidoussis, M.P. and Misra, A.K., “On the nonlinear dynamics of cantilevered circular cylindrical shells conveying fluid,” 10th International Conference on Flow-Induced Vibrations, FIV 2012, Dublin, Ireland, July 2-6, 2012.
Keshmiri, M. and Misra, A.K., “Near optimal deployment of a subsatellite in a space elevator system,” 3th International Space Conference of Pacific-basin Societies (ISCOPS), Kyoto, Japan, May 15-18, 2012.
Aslanov, V.S., Ledkov, A.S., Misra, A.K. and Guerman, A. D., “Motion of the space elevator after ribbon rupture,” 63rd International Astronautical Congress (IAC), Naples, Italy, October 1-5, 2012, Paper No. IAC-12.D.4.3.9.
Keshmiri, M. and Misra, A.K., On the deployment of a subsatellite in a space elevator. 63rd International Astronautical Congress (IAC), Naples, Italy, October 1-5, , 2012, Paper No. IAC-12.D.4.3.8.
Woo, P. and Misra, A.K., Dynamics of a spacecraft near binary asteroids. Invited Lecture, ICoMeC 2012, Bhubaneswar, India, December 6-7, 2012.
MONGEAU, L.
Journal Publications
Miri, A.K., Tripathy, U., Mongeau, L., and Wiseman, P.W., 2012, “Nonlinear laser scanning microscopy of human vocal folds,” Laryngoscope, Vol. 122, No. 2, pp. 356-363.
Najafiyazdi, A., and Mongeau, L., 2012, “An absorbing boundary condition for the lattice Boltzmann method based on the perfectly matched layer formulation,” Computers and Fluids, Vol. 68, pp. 203-218.
Najafiyazdi, A., and Mongeau, L., 2012, “A Low-Dispersion and Low-Dissipation Implicit Runge-Kutta Scheme,” Journal of Computational Physics, Vol. 233, pp. 315-323.
Miri, A.K., Barthelat, F., and Mongeau, L., 2012, “Effects of dehydration on the viscoelastic properties of vocal folds in large deformations,” Journal of Voice, Vol. 26, No. 6, pp. 688-697.
Miri, A.K., Mongrain, R., Chen, L.X., and Mongeau, L., 2012,“Quantitative Assessment of the Anisotropy of Vocal Fold Tissue Using Shear Rheometry and Traction Testing,” Journal of Biomechanics, Vol. 45, No. 16, pp. 2943-2946.
Conference Proceedings
Adib, M., Catalano, F., Hileman, J., Huff, D., Ito, T., Joselzon, A., Khaletskiy, Y., Michel, U., Mongeau, L. and Tester, B.J., “Novel Aircraft Noise Technology Review and Medium and Long Term Noise Reduction Goals,” Report to CAEP by the CAEP Noise Technology Independent Expert Panel (IEP2), CAEP/9 - WP/16, ICAO report, 2012.
Habibi, K., Rafat, Y., Mongeau, L., and Taher, R., “Numerical and experimental characterization of oscillatory flows over a flat spoiler in a duct,” Proceedings of Inter-Noise 2012, pp. 2702-2712, New York, New York, August 19-22, 2012.
Habibi, K., and Mongeau, L., “Numerical simulation of sound absorption by turbulent jet flows using the Lattice-Boltzmann method,” Proceedings of Inter-Noise 2012, pp. 2612-2627, New York, New York, August 19-22, 2012.
Taher, R., Amiri, S., and Mongeau, L., “Heat transfer and drag on a stationary heated circular cylinder in a periodic flow,” Proceedings of Inter-Noise 2012, pp. 3879-3892, New York, New York, August 19-22, 2012.
Miri, A.K., and Mongeau, L., “Role of collagen hierarchy in soft tissue elasticity,” 18th Congress of the European Society of Biomechanics, Lisbon, Portugal, July 1-4, 2012.
Heris, H.K., Miri, A.K., Barthelat, F., Tripathy, U., and Mongeau, L., “Anisotropic indentation of vocal fold tissue using atomic force microscopy,“ The 8th International Conference on Voice Physiology and Biomechanics, Erlangen, Germany, July 3-4, 2012.
Kazemirad, S., Heris, H.K., and Mongeau, L.,“Quantifying the frequency-dependent viscoelastic properties of soft biomaterials,“ The 8th International Conference on Voice Physiology and Biomechanics, Erlangen, Germany, July 3-4, 2012.
Coppoolse, J.M.S., Van Kooten, T.G., Li, N.Y.K., Thibeault, S.L., Heris, H.K., Mongeau, L., Pitaro, J., and Daniel, S.J., “In vivo study in a rat animal model of composite microgels based on hyaluronic acid and gelatin for the reconstruction of the vocal fold lamina propria following injury,“ The 8th International Conference on Voice Physiology and Biomechanics, Erlangen, Germany, July 3-4, 2012.
Alavijeh, N.L., Miri, A.K., and Mongeau, L., “Exact geometrical-based finite element modeling for characterization of mechanical properties of vocal fold tissue,” The 8th International Conference on Voice Physiology and Biomechanics, Erlangen, Germany, July 3-4, 2012.
MONGRAIN, R.
Journal Publications
Al-Mangour B., Mongrain R., Irissou E., Yue S., 2012, “Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray,” Surface and Coatings Technology 2012 (available online November 28).
Miri A.K. Mongrain R., Chen L.X., Mongeau L., 2012, “Quantification of Vocal Fold Anisotropy using Shear Rheology and Traction-Testing,” Journal of Biomechanics 45(16) :2943-2946.
Al-Mangour B., Dallala R., Zhim F., Mongrain R., Yue S., 2012, “Fatigue behavior of annealed cold-sprayed 316L stainless steel coating for biomedical applications,” Materials Letters 91 :352-355.
Nobari S., Mongrain R., Gaillard E., Leask R., Cartier R., 2012, “Therapeutic vascular compliance change may cause significant variation in coronary perfusion: a numerical study,” Special Issue on Computational Analysis of Cardiovascular Hemodynamics in Comput Math Methods Med, Article ID 791686, 10 pages, doi:10.1155/2012/ 791686.
Molavi Zarandi M, Mongrain R, and Bertrand OF, 2012, “Determination of Flow Conditions in Coronary Bifurcation Lesions in the Context of the Medina Classification,” Modeling and Simulation in Engineering, Article ID 419087, 10 pages doi:10.1155/2012/419087.
Rouleau L., Tremblay D., Cartier R., Mongrain R., Leask R., 2012, “Regional variations in canine descending aortic tissue mechanical properties change with formalin fixation,” Cardiovasc Pathol 21(5):390-397.
Amabili M., Karazis K., Mongrain R., Païdoussis M.P., Cartier R., 2012, “A Three-layer model for buckling of a human aortic segment under specific flow-pressure conditions,” International Journal of Numer Method Biomed Eng, 28(5):495-512.
Books
Book Chapter: Reiter S., Mongrain R., Abdelali M., Tardif J.-C., 2012, Medical applications of poly(vinyl alcohol) cryogels, Polymers at Cryogenic Temperatures, Editor(s): Susheel Kalia & Shao-Yun Fu, Publisher: Springer-Verlag, Germany.
Conference Proceedings
Amabili M., Karazis K., Mongrain R., Paidoussis M., Cartier R., “A three-layer model for buckling of a human aortic segment under specific flow-pressure conditions,” IOP Institute of Physics, Modern Practice in Stress and Vibration Analysis, Glasgow, UK, August 29-31, 2012.
Mongrain R., Almangour B., Yue S, Bertrand O.F., “Development of a new bioresorbable stent using cold spray,” EBR 2012, Endocoronary Biomechanics Research Symposium, Marseille, France, Mai, 2012.
Mongrain R, Azar T., Angeles J., Kovecses J., Cecere R., “A Novel Percutaneous Mitral Valve Repair Technique,” EBR 2012, Endocoronary Biomechanics Research Symposium, Marseille, France, Mai, 2012.
Galaz R., Olivas L., Mongrain R., “Stent design optimization to minimize longitudinal deformation,” EBR 2012, Endocoronary Biomechanics Research Symposium, Marseille, France, Mai, 2012.
Reiter S., Mongrain R., Abdelali M., Tardif J.C., “Coronary Atherosclerotic Plaque Rupture via an Inherent Pulsatile Fatigue Mechanism,” The 8th European Solid Mechanics Conference Euromech, Graz, Austria, July 9-13, 2012.
Abdelali M., Reiter S., Mongrain R., Tardif J.C., “Coronary atherosclerotic plaque vulnerability analysis: a perivascular approach,” The 8th European Solid Mechanics Conference Euromech, Graz, Austria, July 9-13, 2012.
Nobari S., Mongrain R., Leask R., Cartier R., “Assessment of the effect of coronary occlusion on aortic valve dynamics using a global 3D FSI model,” Proceedings of the ASME 2012 Summer Bioengineering Conference , Fajardo, Puerto Rico, USA, June 20-23 2012, # 80395, SBC.
Shahmansouri N, Prithipaul P., Mongrain R., Cartier R., “Developing Patient-specific 3D-models of ascending thoracic aortic aneurysm,” ICGG 2012 The 15th International Conference on Geometry and Graphics, Montreal, Canada, August 1-5, 2012.
Busseuil D., Trapeaux J., Shi Y., Nobari S., Shustik D., Mecteau M., Lebel M., Mongrain R., Rhéaume E., Tardif J.-C., “ApoA-I mimetic peptide infusions improve aortic valve stenosis in ApoE/- and Wrn delta hel/delta hel mice,” European Society of Cardiology Congress ESC, Munich, Germany, 2012, # P5563.
Nobari S., Mongrain R., Leask R., Cartier R., “Three dimensional Aortic valve geometry creation,” ICGG 2012 The 15th International Conference on Geometry and Graphics, Montreal, Canada, August 1-5, 2012.
Molavi Zarandi M., Mongrain R., Bertrand O.F, “Characterization of Physiological Flow in Arterial Bifurcation Lesions,” 34th Annual International IEEE EMBS Conference, San Diego, California, USA, 2012.
Ah-Kane F., Barua R., Mongrain R., Yue S., “Stent Design using Nano-Structured Materials,” McGill University, SURE, 2012.
Limoyo O., Shahmansouri N., Cartier R., Mongrain R., “Cyclical Test Frequency Dependence Study on the Ascending Thoracic Aorta,” McGill University, SURE, 2012.
Abdelali M., Reiter S., Mongrain R., Bertrand M., Tardif J.-C., “Fibrous Cap Buckling in Atherosclerotic Plaque: Numerical and Analytical Studies,” Montreal Heart Institute Research Day, ICM, 2012.
Azar T., Cecere R., Angeles J., Kovecses J., Mongrain R., Hikmat H., Hagen R., Alayli K., Prithipaul P., “Dynamic left atrioventricular chambers system for assisting in the development of percutaneous mitral valve repair techniques,” McGill Cardiovascular Research Day, Montreal, 2012.
MYDLARSKI, L.
Journal Publications
Lepore, J. and Mydlarski, L., 2012, “Finite-Péclet-number effects on the scaling exponents of high-order passive scalar structure functions,” Journal of Fluid Mechanics, 713, pp. 453-481.
Khorsandi, B., Mydlarski, L. and Gaskin, S.J., 2012. “Noise in turbulence measurements using acoustic Doppler velocimetry,” Journal of Hydraulic Engineering, Vol. 138 No. 10, pp. 829–838.
Conference Proceedings
Mydlarski, L., Germaine, E. and Cortelezzi, L., “Small-scale statistics of passive scalars released from concentrated sources in turbulent channel flow,” Presented at the 65th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, San Diego, November 18-20, 2012, Published in the Bulletin of the American Physical Society, Volume 57, No. 17, p. 397-398.
Germaine, E., Mydlarski L. and Cortelezzi, L., “Effect of initial conditions on mixing within a turbulent channel flow,” Presented at the 9th European Fluid Mechanics Conference, Rome, Italy, September 9-13, 2012, Abstract published in the Book of Abstracts – 9th European Fluid Mechanics Conference, See: http://www.efmc9.eu/absbook/files/0539_TU4_Cortelezzi_Luca.pdf .
NADARAJAH, S.
Journal Publications
Mosahebi, A., Nadarajah, S., “An Adaptive Non–Linear Frequency Domain Method for Viscous Periodic Steady State Flows,” Computers and Fluids, Elsevier, December, doi: http://dx.doi.org/10.1016/j.compfluid.2012.12.016.
Cagnone, JS; Vermier, B; and Nadarajah, S, 2012, “A p-Adaptive Scheme for the Lifting Collocation Penalty Formulation for Viscous Flows,” Journal of Computational Physics, Elsevier, October, doi: http://dx.doi.org/10.1016/ j.jcp.2012.08.053.
Walther, B. and Nadarajah, S, 2012, “Constrained Adjoint-Based Aerodynamic Shape Optimization of a Single-Stage Transonic Compressor,” ASME Journal of Turbomachinery, Vol. 135, September, [DOI: 10.1115/1.4007502].
Cagnone, J.S. and Nadarajah, S., 2012,“A Stable Interface Element Scheme for the p-Adaptive Lifting Collocation Penalty Formulation”, Journal of Computational Physics, Elsevier, Vol. 231, Issue 4, February.
Conference Proceedings
Mosahebi Mohamadi, A. and Nadarajah, S.,“Dynamic Mesh Deformation for Implicit Adaptive Non-Linear Frequency Domain Method,” Seventh International Conference on Computational Fluid Dynamics, Big Island, Hawaii, July 9-13, 2012.
Walther, B. and Nadarajah, S.,“Constrained Adjoint-Based Aerodynamic Shape Optimization of a Single-Stage Transonic Compressor,” ASME TurboExpo, Copenhagen, Denmark, June, 2012.
Walther, B. and Nadarajah, S., “Constrained Adjoint-Based Aerodynamic Shape Optimization in a Multistage Turbomachinery Environment,” 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January, 2012.
Khayatzadeh, P. and Nadarajah, S., “Aerodynamic Shape Optimization of Natural Laminar Flow (NLF) Airfoils,” 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January, 2012.
Poirier, V. and Nadarajah, S., “Mesh Deformation via Radial Basis Functions for a CAD-Based Optimization Framework,” 50th AIAA Aerospace Sciences Meeting, Nashville, TN, January, 2012.
Mosahebi Mohamadi, A. and Nadarajah, S., “An Implicit Adaptive Non-Linear Frequency Domain Method for Periodic Viscous Flows,” 20th Annual Conference of the CFD Society of Canada, Canmore, AL, Canada, May 2012.
Cagnone, J.S., Vermier, B., and Nadarajah, S., “A Polynomial Adaptive Lifting Collocation Penalty Scheme for Viscous Compressible Flows,” 20th Annual Conference of the CFD Society of Canada, Canmore, AL, Canada, May 2012.
NAHON, M.
Journal Publications
Masciola, M., Nahon, M. and Driscoll, F. 2012, “Static Analysis of a Lumped Mass Cable System,” ASCE Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 138, No. 2, pp. 164-171.
Wiens, A. and Nahon, M., 2012, “Optimally Efficient Swimming in Hyper-Redundant Mechanisms: Control, Design, and Energy Recovery,” Bioinspiration & Biomimetics, Vol. 7, No.4, 13 pages.
Conference Proceedings
Liesk, T. and Nahon, M., “Design and Experimental Validation of a Controller Suite for an Autonomous, Finless Airship,” American Control Conference, Montreal, June 27-29, 2012.
Nahon, M., Khan, W. and Sevaldson, M., “Modeling and Control of a Highly-Maneuverable Fixed-Wing UAV,” Unmanned Systems Canada Conference, (presentation only), Ottawa, November 6-9, 2012.
PAÏDOUSSIS, M.
Journal Publications
Rinaldi, S. and PAÏDOUSSIS, M.P., 2012, “Theory and experiments on the dynamics of a free-clamped cylinder in confined axial air-flow,” Journal of Fluids and Structures, Vol. 28, pp. 167-179.
Zhao, W., PAÏDOUSSIS, M.P., Tang, L., Liu, M. and Jiang, J., 2012, “Theoretical and experimental investigations of the dynamics of cantilevered flexible plates subjected to axial flow,” Journal of Sound and Vibration, Vol. 331, pp. 575-587.
Giacobbi, D.B., Rinaldi, S., Semler, C. and PAÏDOUSSIS, M.P., 2012, “The dynamics of a cantilevered pipe aspirating fluid studied by experimental, numerical and analytical methods,” Journal of Fluids and Structures, Vol. 30, pp. 73-96.
Amabili, M., Karazis, K., Mongrain, R., PAÏDOUSSIS, M.P. and Cartier, R., 2012, “A three-layer model for buckling of a human aortic segment under specific flow-pressure conditions,” International Journal for Numerical Methods in Biomedical Engineering, Vol. 28, pp. 495-512.
Abderrahmane, Ait H., PAÏDOUSSIS, M.P., Fayed, M. and Ng, H.D., 2012, “Nonlinear dynamics of silk and mylar flags flapping in axial flow,” Journal of Wind Engineering & Industrial Aerodynamics, Vol. 107-108, pp. 225-236.
Ghayesh, M.H., Amabili, M. and PAÏDOUSSIS, M.P., 2012, “Nonlinear vibrations and stability of an axially moving beam with an intermediate spring support: two-dimensional analysis,” Journal of Nonlinear Dynamics, Vol. 69, pp. 193-210.
Ghayesh, M.H., Amabili, M. and PAÏDOUSSIS, M.P., 2012, Thermo-mechanical phase-shift determination in Coriolis mass-flowmeters with added masses, Journal of Fluids and Structures, Vol. 34, pp. 1-13.
Shen, H., PAÏDOUSSIS, M.P., Wen, J., Yu, D., Cai, L. and Wen, X., 2012, “Acoustic cloak/anti-cloak device with realizable passive/active metamaterials,” Journal of Physics D: Applied Physics, Vol. 45, pp. 285401.
Ghayesh, M.H., Amabili, M. and PAÏDOUSSIS, M.P., 2012, “Subcritical parametric response of an axially accelerating beam, Journal of Thin-Walled Structures,” Vol. 60, pp. 185-193.
Shen, H., Wen, J., PAÏDOUSSIS, M.P., Yu, D, Asgari, M. and Wen, X., 2012, “Control of sound and vibration for cylindrical shells by utilizing a periodic structure of functionally graded materials,” Journal of Physics Letters A, Vol. 45, pp. 3351-3358.
Conference Proceedings
PAÏDOUSSIS, M.P., Amabili, M. and Ghayesh, M.H., “Dynamics of Fluid-Conveying Cantilevered Pipes with Additional Adornments,” Proceedings of 10th International Conference on Flow-Induced Vibration (& Flow-Induced Noise) (eds. C. Meskell & G. Bennett), Dublin, Ireland, July 3-6, 2012, pp. 1-6.
Paak, M., PAÏDOUSSIS, M.P., and Misra, A.K., “On the Nonlinear Dynamics of Circular Cylindrical Shells Conveying Fluid,” Proceedings of 10th International Conference on Flow-Induced Vibration (& Flow-Induced Noise) (eds. C. Meskell & G. Bennett), Dublin, Ireland, July 3-6, 2012, pp. 383-390.
Kheiri, M., PAÏDOUSSIS, M.P., Amabili, M. and Epureanu, B.I., Proceedings of 10th International Conference on Flow-Induced Vibration (& Flow-Induced Noise) (eds. C. Meskell & G. Bennett), Dublin, Ireland, July 3-6. Three-Dimensional Dynamics of Long Pipes Towed Underwater, 2012, pp. 719-726.
PASINI, D.
Journal Publications
Khanoki Sajad A., Pasini, D., 2012, “Multiscale Design and Multiobjective Optimization of Orthopaedic Hip Implants with Graded Cellular Microstructure,” Journal of Biomechanical Engineering, Vol. 134(3), pp. 031004: 1-10, 2102.
Khalil Abad, E.M., Pasini, D., Cecere, R., 2012, “Shape Optimization of stress concentration-free lattice for self-expandable Nitinol stent-grafts,” Journal of Biomechanics, Vol. 45, pp. 1028-1035.
Javid F., Angeles J., Pasini, D., 2012, “Shape synthesis of self-deployable anchors designed for a percutaneous mitral valve repair,” ASME Journal of Biomedical Devices, Vol. 6, No. 1, pp. 011003:1-7.
Vigliotti A., Pasini, D., 2012, “Stiffness and Strength of Tridimensional Periodic Lattices,” Journal of Computer Methods in Applied Mechanics and Engineering, Vol. 229-232, pp. 27-43.
Vigliotti A., Pasini, D., 2012, “Linear multiscale analysis and finite element validation of stretching and bending dominated lattice materials,” Journal of Mechanics of Materials, Vol 46, 57–68.
Faisal, T.R., Hristozov, N., Rey, A., Western, T., Pasini, D., 2012, “Experimental determination of Philodendron melinonii and Arabidopsis thaliana tissue microstructure and geometric modeling via Finite Edge Centroidal Voronoi Tessellation,” Physical Review E, 86(3-1):031921.
Elsayed M., Pasini, D., 2012, “Comprehensive Stiffness of Prestressed Lattice Materials,” Journal of Materials Science Research, Vol.1 (2), pp. 87-109.
Arian Nik, M., Fayazbakhsh, K., Pasini, D., Lessard, L., 2012, “Surrogate-based design optimization of a composite laminate with curvilinear paths,” Composites Structures, Vol 94, pp. 2306–2313.
Conference Proceedings
Murugesan, Y., Rey, A.D. and Pasini, D., “Defect Textures in Polygonal Arrangements of Cylindrical Inclusions in Cholesteric Liquid Crystal Matrices,” MRS meeting, Boston, USA, November 25-30, 2012.
Vigliotti, A., Pasini, D., “A nonlinear constitutive model for lattice materials, Cellular Materials Conference (CellMat2012),” Dresden, Germany, November 7-9, 2012.
Masoumi Khalil Abad, E., Khanoki, S. A., Pasini, D., “Synthesis of Two-dimensional Lattices Free of Stress Concentrators,” 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012.
Fayazbakhsh K., Arian Nik M., Pasini D., Lessard L., “The effect of gaps and overlaps on the in-plane stiffness and buckling load of variable stiffness laminates made by automated fiber placement,”15th European Conference on Composite Materials, Venice, Italy, June 24-28, 2012.
Barnett, E., Angeles, J., Pasini, D. and Sijpkes, P., “Le prototypage rapide robotise pour la fabrication des structures en glace,” 80e du Congrès de l'Acfas, Domaine de recherche 209 - Techniques, mesures et systèmes, Montreal, May 7-9, 2012.
Murugesan, Y., Rey, A.D. and Pasini, D., “Structure and mechanics of biological fiber-laden membranes,” Bulletin of the American Physical Society, 57(1), APS March Meeting 2012, Boston, MA, March, 2012.
Pasini D., Khanoki, S. A., “Femur Hip Prosthesis Inspired by Bone Functional Gradients European Conference on Biological Materials Science,” Potsdam, Germany, March 20-23, 2012.
Javid, F., Angeles, J., Pasini, D., Mongrain, R., Cecere, R., “The Rupture Mechanism of the Mitral Valve Tissue,” IUTAM Summer School on Biomechanics of Tissue and Tissue-Cell Interaction, Purdue University, West Lafayette, IN, 2012.
Arian Nik M, Fayazbakhsh K, Pasini, D., Lessard L., “Optimum Design of Steered-Tow Composite Structures Made by Automated Fiber Placement Method,” 2012 Student Aerospace Forum. McGill University, Montreal, Canada, March 1-2, 2012.
Fayazbakhsh K., Mahdi A. N., Prabhakar S., Pasini, D., Lessard L., “Optimum design of steered-tow composite structures via characterization of Automated Fibre Placement induced defects, CRIAQ 6th Research Forum, Montreal,” May 16-17, 2012.
Masoumi Khalil Abad, E., Pasini, D., Cecere, R., “Shape optimization of stress concentration-free lattice for self-expandable Nitinol stent-grafts,” McGill STIKEMAN VISITING PROFESSORSHIP Research Day, Montreal, May 12, 2012.
Masoumi Khalil Abad, E., Pasini, D., Cecere, R., “Design optimization of a lattice structural cage for the protection of a rotary endovascular catheter,” McGill STIKEMAN VISITING PROFESSORSHIP Research Day, Montreal, May 12, 2012.
SHARF, I.
Journal Publications
Zarrouk, D., Sharf, I. and Shoham, M., 2012, ''Conditions for Worm-Robot Locomotion in a Flexible Environment: Theory and Experiments,'' IEEE Transactions on Biomedical Engineering, Vol. 59, No. 4, pp. 1057-1067.
Conference Proceedings
Zarrouk, D., Sharf, I. and Shoham, M., "Energy Analysis of Worm Locomotion on Flexible Surface," Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2012, Algarve, Portugal, October 7-12, 2012.
Nguyen Huynh, T.-C. and Sharf, I., "Adaptive Reactionless Motion with Joint Limit Avoidance for Robotic Capture of Unknown Target in Space," Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2012, Algarve, Portugal, October 7-12, 2012.
Harmat, A., Sharf, I. and Trentini, M., "A Hybrid Particle/Grid Wind Model for Realtime Small UAV Flight Simulation," Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2012, Algarve, Portugal, October 7-12, 2012.
Harmat, A., Sharf, I. and Trentini, M., "Parallel Tracking and Mapping with Multiple Cameras on an Unmanned Aerial Vehicle," Proc. Fifth International Conference on Intelligent Robotics and Applications, Montreal, October 3-5, 2012.
Sharf, I., Persson, S.M., St-Onge, D. and Reeves, N., “Development of Aerobots for Satellite Emulation, Architecture and Art," Proc. 13th International Symposium on Experimental Robotics, ISER 2012, Quebec City, USA, June 17-21, 2012.
Yang, Y., Sharf, I. and Forbes, J. R., "Nonlinear Optimal Control of Holonomic Indoor Airship," Best Paper Presentation in the Session, Proc. AIAA Guidance, Navigation and Control Conference, Minneapolis, USA, August 13-16, 2012.
Persson, S. M. and Sharf, I., "Invariant Momentum-tracking Kalman Filter for Attitude Estimation," Proc. IEEE International Conference on Robotics and Automation, ICRA2012, Saint Paul, Minnesota, USA, May 14-18, 2012.
Thomson, T., Sharf, I. and Beckman, B., "Kinematic Control and Posture Optimization of a Redundantly Actuated Quadruped Robot," Proc. IEEE International Conference on Robotics and Automation, ICRA2012, Saint Paul, Minnesota, USA, May 14-18, 2012.
Zarrouk, D., Sharf, I. and Shoham, M., "Determining the Condition for Crawling on Flexible Surfaces," Proc. IEEE International Conference on Robotics and Automation, ICRA2012, Saint Paul, Minnesota, USA, May 14-18, 2012.
Turker, K., Sharf, I. and Trentini, M., "Step Negotiation with Wheel Traction: A Strategy for a Wheel-legged Robot," Proc. IEEE International Conference on Robotics and Automation, ICRA2012, Saint Paul, Minnesota, USA, May 14-18, 2012.
Wang, T., Michini, M., Trentini, M. and Sharf, I., "Modelling and System Identification of Draganflyer X8 Aerial Vehicle," presented at the Unmanned Systems Canada Conference, Ottawa, Canada, November 6-9, 2012.
TIMOFEEV, E.
Journal Publications
Hakkaki-Fard, A. and Timofeev, E., 2012, “On numerical techniques for determination of the sonic point in unsteady inviscid shock reflections,” International Journal of Aerospace Innovations, Vol. 4, No.1-2, pp. 41-52.
Conference Proceedings
Kleine, H., Timofeev, E., Hakkaki-Fard, A., and Skews, B., “Shock reflection off cylindrical surfaces - influence of Reynolds number,” In: Proceedings of 30th International Congress on High-Speed Imaging and Photonics, Pretoria, South Africa, September 16-21, 2012, 7 page.
Kleine, H., Timofeev, E., Hakkaki-Fard, A., and Skews, B., “Shock reflection off cylindrical surfaces - influence of Reynolds number,” Abstract of 30th International Congress on High-Speed Imaging and Photonics, Pretoria, South Africa, September 16-21, 2012, 1 page.
VENGALLATORE, S.
Journal Publications
Das, K., Sosale, G. and Vengallatore, S., 2012, "Design, implementation and application of a microresonator platform for measuring energy dissipation by internal friction in nanowires," Nanotechnology, vol. 23, article no. 505703, 7 pages.
Sosale, G., Almecija, D., Das, K. and Vengallatore, S., 2012, “Mechanical spectroscopy of nanocrystalline aluminum films: effects of frequency and grain size on internal friction,” Nanotechnology, vol. 23, article no. 155701, 7 pages.
Ashrafi, B., Das, K., Le Faive, R., Hubert, P. and Vengallatore, S., 2012, “Measuring the elastic properties of free-standing thick films using a nanoindenter-based bending test,” Experimental Mechanics, vol. 52, pp. 371-378.
ZHAO, Y.F.
Conference Proceedings
Zhao, Y.F., Perry, N., Andriankaja, H., “A Manufacturing Informatics Framework for Manufacturing Sustainability Assessment,”19th CIRP International Conference on Life Cycle Engineering, Singapore, 2013.